搜索
Product Center
201841415371879541

Sand Recycling Machine

Sand recycling machine which is also called fine sand recycling machine,fine sand recycling system,fine sand collecting machine,sand recovery machine,fine sand recycling equipment.
201841415371879541
Product Description

  Sand recycling machine which is also called fine sand recycling machine,fine sand recycling system,fine sand collecting machine,sand recovery machine,fine sand recycling equipment.


  Existing artificial mechanism of sand production line,the vast majority of the wet process,irrespective of the form of sand washer,the biggest drawback is fine(below 0.2 mm particles)erosion is serious,some even lost more than 20%.Not only the loss of production,but also seriously affect the distribution of the sand,the grading is not reasonable,fineness modulus increase,greatly reduces the mechanism of sand quality of the product.Not only increased the dosage of the cement in concrete mixing,raise the cost of business propose,and too much fine sand discharge,also can cause the waste of land resources and the environment pollution.To solve above problems,our company successfully developed a series of YC fine sand recycling equipment,this equipment is our company absorbing foreign advanced technology,combined with the customer in the actual production of sand erosion is specially designed for high-tech environmental protection equipment.


  Fine sand recycling machine in practical application,don't need an additional water,extraction of discharge of waste water in the original recovery more than 85%were washed away in the sand or ore,directly adding finished pile or separate storage used as high grade material,directly for clients save comprehensive economic benefit is more than 15%.

 

Yongsheng Mineral Processing Equipment Manufacturing Co


  This equipment is widely used in hydroelectric power station sand aggregate processing system,glass raw material processing system,the artificial sand production line,coarse coal slime recovery of coal preparation plant,and environmental protection engineering(mud purification,etc.)and so on,which can effectively solve the problem of sand production line recovery.


  Fine sand recycling machine working principle:special pump centrifugal slag cleaning of the tank in the sand and water mixture to hydrocyclone centrifugal grading enrichment of fine sand by grit mouth for the vibration sieve dehydration,after sieve dehydration,effective separation of fine sand and water,a small amount of fine sand,clay and so on will be returned to the box back to cleaning tank,mixed reflux of mixture in hydrocyclone,to be sent to the cyclone separation again.When cleaning tank level is too high,the discharge outlet.May be changed by changing the centrifugal pump speed,slurry concentration,regulating the overflow of water,replacement of sand mouth to achieve fineness modulus adjustment,so as to complete their cleaning,their dehydration and classification of three functions.


  Advantages and characteristics:


  1,to reduce the sand erosion,improve the economic benefit at the same time reduces the pollution to the environment.


  2,vibrating screen using polyurethane screen mesh,polyurethane screen mesh live longer than other types,and not easy to plug holes.


  3,cyclone lining polyurethane,improve the service life of the device,can smoothly complete the slurry concentration,liquid clarification etc.


  4,fine sand fully recovery,reduce the workload of settling basin,reduces the cost of tank cleaning.


  5,Reduce the stacking time of fine material,can transfer directly to supply the market.


  6,after a lot of field test and improvement,reduced spare parts,equipment whole structure concise and efficient,recycling ability strong,easy to operation and maintenance,low operating costs.


  7,professional engineers,according to the different requirements of users,design reasonable solution.


  8,equipment with reference to the state environmental protection standards,low noise,dust can form a complete set of equipment,construction environment in full compliance with environmental requirements.

 

Model

Centrifugal Pump

Hydrocyclone

Dewatering screen

Capacity

(m3/h)

Weight

(Kg)

Power

(Kw)

Material

Specification

(mm)

Specification

(mm)

Power

(kw)

YS10-25

7.5-11

Cr26

250

1000×2000

1.5×2

30-80

2550

YS10-30

11-15

Cr26

300

1000×2000

1.5×2

40-100

2700

YS12-55

15-22

Cr26

550

1250×2500

2.2×2

100-200

3750

YS12-65

18.5-30

Cr26

650

1250×2500

2.2×2

120-250

4245

YS15-65

18.5-30

Cr26

650

1500×3000

3×2

150-275

4900

YS15-75

37-55

Cr26

750

1500×3000

3×2

180-350

5650

关键词:
the
of
sand
to
fine
and
in
is
recycling
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加
Previous
Next
The MZ-1000 system prototype
The MZ-1000 system prototype
More 白箭头 黑箭头
Low Power Laboratory drum wet low -intensity magnetic separator
  Feature   1.Separating small size   2.Easy to operate   3.Energy conservation and environment protection   4.All products through the ISO certification   Detailed Product Description of laboratory magnetic separator   Cylinder size Technical Parameter of laboratory Drum Wet Low-intensity Magnetic Separator   XCRS Wet Magnetic Separator is mainly designed for labs for netallic mineral processing.It conducts concurrent magnetic separation of fine-grain ores with strong magnetism by use of Wet Method.It is small in volume,light in weight,simple in operation and convenient in maintenance.However,it is unsuitable to be used in beneficiation by the former corrosive.The product is produced by the only enterprise designated by the former Ministry of Geology and Mineral Resources,in compliance with the Industrial standards   Operating Principle   Drum machine built with open magnetic system,as to the mine quickly when the sub-elected magnetic minerals,magnetic minerals in the tank was in the dark magnetic suction surface,get rid of sludge by magnetic stirring and finally with the drum heads With flush discharged outside the rotating machine.   Technical parameters of labratory magnetic separator   Model Unite XCRS 400/300 Magnetic impeller size mm 400/300 Rotating speed r/min 25 Capacity size kg/h 20-60 Feed size mm 3 Intensity GS 1250(100KA/m) Adjustable stepless Voltage V 380 power KW 0.25 Supply equipment taiwan Excitation power 1 Overall dimensions mm 783/600/1200 Weight kg 250
More 白箭头 黑箭头
XFD-12 Laboratory Small Ore Dressing Equipment Flotation Cell, Match with multiple cell flotation machine
XFD-12 Laboratory Small Ore Dressing Equipment Flotation Cell,Match with multiple cell flotation machineXFD-12 Laboratory Small Ore Dressing Equipment Flotation Cell,Match with multiple cell flotation machineXFD-12 Laboratory Small Ore Dressing Equipment Flotation Cell,Match with multiple cell flotation machineXFD-12 Laboratory Small Ore Dressing Equipment Flotation Cell,Match with multiple cell flotation machineXFD-12 Laboratory Small Ore Dressing Equipment Flotation Cell,Match with multiple cell flotation machineXFD-12 Laboratory Small Ore Dressing Equipment Flotation Cell,Match with multiple cell flotation machine
More 白箭头 黑箭头
Best price PE 100*60 Home use mini jaw stone crusher for sample crushing lab use small jaw crusher Price
Laboratory Jaw Crusher is mainly used in laboratory tests and small scale ore crushing.It can deal with micro pulverizing,secondary crushing and fine crushing,main using industries are coal power,electricity,mining,geology,chemical,metallurgy,building materials and some other laboratory environmental protection equipment industries.This range of machine had been manufactured by our company over 6 years which means a strong quality guarantee and competitive price.
More 白箭头 黑箭头
460*600mm Small Capacity 45-350 kg/h Ball Mill Design Low Prices Tube Grinder Mini Laboratory Ball Mill
Ball Mill is a type of grinder used to grind materials into an extremely fine powder mainly for use in the mineral processing industry.Ball Mills can grind various ores and other materials either wet or dry,depending on requirements.Ball Mills consist of a large cylinder which slowly rotates around a horizontal axis.The cylinder is partially filled with the material to be ground plus the grinding medium(metal grinding balls).Inside the cylinder,the medium will be lifted to a certain height under the action of centrifugal force and then drop or fall,grinding the ore in between the balls as they interact.Feed material to be ground enters the cylinder via a hopper on one end and after being crushed by the grinding medium is discharged at the other end.
More 白箭头 黑箭头
100 Ton Per Hour Concrete Recycling Portable Crusher Granite Limestone Mobile Wheels Impact Crushing Plant
JXSC Mobile crushing stations are hot sale crushing equipment.Mobile crushing stations are mainly flexible in operation and easy to move.Flexible configuration,wide crushing materials,convenient maintenance and reliable performance.The mobile impact crusher is specialized in crushing the contruction rubbish like concrete.The 100tph mobile impact crusher station is the hottest seller one.
More 白箭头 黑箭头
Sand Recycling Machine
Sand recycling machine which is also called fine sand recycling machine,fine sand recycling system,fine sand collecting machine,sand recovery machine,fine sand recycling equipment.
More 白箭头 黑箭头
Sand Washing & Recycling Machine
Sand washing&recycling machine is based on sand washer and sand recycling system main tech,we make it a compact multiple function sand washer.It is widely used for crushed sand,river sand,lake sand or sea sand washing,screening,recycling and dewatering.
More 白箭头 黑箭头
Previous page
1
2
8
There is currently no information to display
Please add data record on website background.
There is currently no content to display
Please add data record on website background.

Free product consultation

WRITE A MESSAGE TO US

Username used for comment:
客户留言
Description:
验证码

all rights reserved © 2020 Jiangxi Shicheng Yongsheng Mineral Processing Equipment Manufacturing Co., Ltd.      Gan IPC No. 14005308